Seven FX “Presets” on a Flashback Delay
After creating a tone print for live use that was designed to minimize knob tweaking on stage I figured a way to take it a step further.
Now I can cover pretty much every delay/echo/reverb type effect I need with a quick turn of one knob. I’ve marked “presets” on the DELAY knob for different delay times, repeats and level, automatically suited to each type of delay effect I use.
If that wasn’t enough I added a cool “Fender Vibratone” (rotating speaker) effect which can easily be dialed in from OFF to slow to fast with very little hassle. Keeping the 3 options at hard left, hard right and anywhere between 10 to 2 o’clock on the dial. When playing live it’s easy to quickly select what I need on the fly when I have no time to be too accurate!
Settings in the Toneprint editor are
Model: Tape
DELAY Global settings
- Saturation: 12dB
- FB HiCut: 900Hz
- FB LoCut: 630Hz
- Dynamic Delay Sensitivity: -14dB
- Damping: 19dB
- Release Time: 725ms
MODULATION Global Settings
- Modulation Type: Vibrato
- Modulation Active: yes!
- LFO Waveform: Sine
- HiCut: 20.0kHz
- Output Level: 0dB
- Feedback: 0.0%
- Feedback HiCut: 1.00kHz
MAPPING
Delay dial:
- Delay time: 0ms – 160ms – 210ms – 390ms – 430ms
- Delay Feedback: 0% – 10% – 10% – 20% – 30%
- Output Level: -6dB – -12dB – -9dB – -3dB – 0dB
Feedback Dial:
- Modulation Speed: 61.5mHz – 1.70Hz – 1.70Hz – 1.70Hz – 6.00Hz
- Modulation Depth: 0.0% – 9.5% – 9.5% – 9.5% – 11.0%
- Modulation Mix: 0% – 80% – 80% – 80% – 100%
Thanks for watching!
Consider Supporting an Original Music Creator.
Become a Rob C Patron
Donate via Paypal